The assembly instructions for the Mona second-skin top and the pictures appear here as a supplement to the booklet. This is the A1+B1 version and it's cut from a ribbed cotton jersey.
Prepare the fabric and the several pieces by following the steps 1 and 2 in the booklet.
Step 3
Stitch the shoulders of the front and back pieces together right sides together. Finish the raw edges and press the seam allowances towards the back of the top.
Step 4.1
Fold the neckband in half lengthways wrong sides together. Press the folded edge. Tuck the outer edges at 8mm towards the fold wrong sides together. Press.
This is what you get.
Step 4.2
Fold 1cm of the neckband at one end to the wrong side.
Align the neckband around the wrong side of the neck edge. Slightly stretch the fabric and let the tape follow the curve of the neckline. Match the fold with one of the shoulder seams and pin. Stitch at 8mm and place the tape on top of the fold once the loop is formed to join the edges properly.
Trim the excess fabric.
Étape 4.3
Now fold the neckband over the right side of the garment. Fold the tape to the inside at 8mm. Topstich at 1mm and press.
Step 5
Pin the sleeves to the armholes, right sides together, matching the shoulder seam with the center of the sleeve cap. Distribute the ease and stitch at 1cm.
Step 6
Finish the bottom edges of the garment and sleeves. For the sleeve, press up the 1,5cm seam allowance to the wrong side and topstitch. Proceed the same way for the other sleeve and bottom hem of the garment.
And here it is! Don't hesitate to share it with us :)
#mona_lespetitestailleuses